LPF 24dB/Oct¶
- Author or source: ed.luosfosruoivas@naitsirhC
- Type: Chebyshev
- Created: 2006-07-28 17:58:33
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 | First calculate the prewarped digital frequency:
K = tan(Pi * Frequency / Samplerate);
Now we calc some Coefficients:
sg = Sinh(PassbandRipple);
cg = Cosh(PassbandRipple);
cg *= cg;
Coeff[0] = 1 / (cg-0.85355339059327376220042218105097);
Coeff[1] = K * Coeff[0]*sg*1.847759065022573512256366378792;
Coeff[2] = 1 / (cg-0.14644660940672623779957781894758);
Coeff[3] = K * Coeff[2]*sg*0.76536686473017954345691996806;
K *= K; // (just to optimize it a little bit)
Calculate the first biquad:
A0 = (Coeff[1]+K+Coeff[0]);
A1 = 2*(Coeff[0]-K)*t;
A2 = (Coeff[1]-K-Coeff[0])*t;
B0 = t*K;
B1 = 2*B0;
B2 = B0;
Calculate the second biquad:
A3 = (Coeff[3]+K+Coeff[2]);
A4 = 2*(Coeff[2]-K)*t;
A5 = (Coeff[3]-K-Coeff[2])*t;
B3 = t*K;
B4 = 2*B3;
B5 = B3;
Then calculate the output as follows:
Stage1 = B0*Input + State0;
State0 = B1*Input + A1/A0*Stage1 + State1;
State1 = B2*Input + A2/A0*Stage1;
Output = B3*Stage1 + State2;
State2 = B4*Stage1 + A4/A3*Output + State2;
State3 = B5*Stage1 + A5/A3*Output;
|
Comments¶
- Date: 2006-09-14 10:36:43
- By: musicdsp@Nospam dsparsons.co.uk
You've used two notations here (as admitted on KVR!)..
Updated calculation code reads:
=-=-=-= Start =-=-=-=
Calculate the first biquad:
//A0 = (Coeff[1]+K+Coeff[0]);
t = 1/(Coeff[1]+K+Coeff[0]);
A1 = 2*(Coeff[0]-K)*t;
A2 = (Coeff[1]-K-Coeff[0])*t;
B0 = t*K;
B1 = 2*B0;
B2 = B0;
Calculate the second biquad:
//A3 = (Coeff[3]+K+Coeff[2]);
t = 1/(Coeff[3]+K+Coeff[2]);
A4 = 2*(Coeff[2]-K)*t;
A5 = (Coeff[3]-K-Coeff[2])*t;
B3 = t*K;
B4 = 2*B3;
B5 = B3;
Then calculate the output as follows:
Stage1 = B0*Input + State0;
State0 = B1*Input + A1*Stage1 + State1;
State1 = B2*Input + A2*Stage1;
Output = B3*Stage1 + State2;
State2 = B4*Stage1 + A4*Output + State2;
State3 = B5*Stage1 + A5*Output;
=-=-=-= End =-=-=-=
Hope that clears up any confusion for future readers :-)
- Date: 2008-06-24 13:57:19
- By: moc.liamg@tnemelCssoR
The variable State3 is assigned a value, but is never used anywhere. Is there a reason for this?
- Date: 2008-10-17 00:40:33
- By: moc.liamg@321tiloen
Just ported this into Reaper's native JesuSonic.
There are errors in both of the codes above :D
Use this:
//start
A0 = 1/(Coeff[1]+K+Coeff[0]);
A1 = 2*(Coeff[0]-K)*A0;
A2 = (Coeff[1]-K-Coeff[0])*A0;
B0 = A0*K;
B1 = 2*B0;
B2 = B0;
A3 = 1/(Coeff[3]+K+Coeff[2]);
A4 = 2*(Coeff[2]-K)*A3;
A5 = (Coeff[3]-K-Coeff[2])*A3;
B3 = A3*K;
B4 = 2*B3;
B5 = B3;
Stage1 = B0*Input + State0;
State0 = B1*Input + A1*Stage1 + State1;
State1 = B2*Input + A2*Stage1;
Output = B3*Stage1 + State2;
State2 = B4*Stage1 + A4*Output + State3;
State3 = B5*Stage1 + A5*Output;
//end
@RossClement[ AT ]gmail[ DOT ]com
'State3' should be added in this line
-> State2 = B4*Stage1 + A4*Output + State3;